ohiohmmwv
Member
- 451
- 16
- 18
- Location
- Columbiana, Ohio
Does anyone know if these engine lift brackets that are from am general fit the 6.5 turbo engine as well?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Am general engine lift bracket
- Thread starter ohiohmmwv
- Start date
BLK HMMWV
Well-known member
- 1,616
- 571
- 113
- Location
- Pasadena California
I have the 2 piece engine lifting bracket that I used for my 6.2 removal and 6.5 install. I'm not familiar with the turbo motor.
From what I remember the front bracket bolted to the front of the right head and the rear was to the back of the left head. I'm not sure were the turbo is located . My guess would be if it didn't you would just have to remove it .
From what I remember the front bracket bolted to the front of the right head and the rear was to the back of the left head. I'm not sure were the turbo is located . My guess would be if it didn't you would just have to remove it .
Hummerdave
Member
- 34
- 5
- 8
- Location
- Tulsa,OK
Yes, it fits turbo's, just barely clears the intakes...
we use one here at the shop...
Dave
we use one here at the shop...
Dave