mangus580
New member
- 6,010
- 282
- 0
- Location
- Western NY
What brake fluid was used in the M37, regular or silicone?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
DOT3 or DOT5
- Thread starter mangus580
- Start date
CGarbee
Well-known member
- 2,448
- 510
- 113
- Location
- Raleigh, NC
DOT3 was what was used...
There was a really long winded discussion about this on the www.g741.org forum a short while ago... The basic consensus was to stick with DOT3/4 and flush it out every year or two even if you had just rebuilt the system...
There was a really long winded discussion about this on the www.g741.org forum a short while ago... The basic consensus was to stick with DOT3/4 and flush it out every year or two even if you had just rebuilt the system...
Longhunter7
Member
- 923
- 8
- 18
- Location
- Northern Illinois
mangus580
I am using DOT-4 cuz it is just a little bit better the DOT-3, as per the discussion the was mentioned by CGarbee.
I am using DOT-4 cuz it is just a little bit better the DOT-3, as per the discussion the was mentioned by CGarbee.
Westech
CPL
- 6,104
- 206
- 63
- Location
- cow farts, Wisconsin
I use dot 3 in my deuce and have taken it on 1000 mile trips with out a problem. but there right you should flush it every couple of years or even every year if you drive the heck out of it.