ba35
New member
- 1
- 0
- 0
- Location
- Ormond beach FL
does any one know the weight and gvwr for the sf-97 on a m35a2-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
filling out sf 97
- Thread starter ba35
- Start date
does any one know the weight and gvwr for the sf-97 on a m35a2
Divemaster920
Banned
- 494
- 1
- 0
- Location
- VA
Deuce - Steel Soldiers::Military Vehicles Supersitehttp://www.steelsoldiers.com/showwiki.php?title=wiki:D
The curb weight of an M35 is between 13,000 and 16,000 pounds empty.
gvwr add 10000.
The curb weight of an M35 is between 13,000 and 16,000 pounds empty.
gvwr add 10000.
bulldog_mack13
3/3 ACR
- 2,969
- 34
- 0
- Location
- Colo Springs, CO
Its on your data plate in the cab of your truck - Jay
djimmy31
New member
- 75
- 0
- 0
- Location
- louisville ky
I think they are a hair over 23,000 for a regular deuce but bulldog is right your data plate will tell all....
Barrman
Well-known member
- 5,187
- 1,628
- 113
- Location
- Giddings, Texas
Use the exact numbers from the data plate. That way if you get pulled over the officer will only have 1 set of numbers to think about instead of one in his hand or on his screen and what is on your dash. Keep it simple.
- 5,316
- 3,220
- 113
- Location
- Lexington, South Carolina
Because SC charges for tags by GVWR weight, I've registered all mine by their 'off road' GVWR, which saves me about $75 per truck, per year on tags. YMMV!
Radden
Member
- 41
- 7
- 8
- Location
- Lexington/Ky
Hi,
I did not see a GVWR on any of the data plates. The definately are none on the doors and the doors look like they have been replaced at some point. If in filling out the SF97 is the any advantage to putting a higher or lower number in the GVWR spot on the form?
Does it then come out on the SF97 that you receive to use to title it? Also, When you license it, can you license it for a higher or lower value than what is a result of the SF97 and title? Is it something where you can license it up to the GVWR?
Thanks,
Bob
I did not see a GVWR on any of the data plates. The definately are none on the doors and the doors look like they have been replaced at some point. If in filling out the SF97 is the any advantage to putting a higher or lower number in the GVWR spot on the form?
Does it then come out on the SF97 that you receive to use to title it? Also, When you license it, can you license it for a higher or lower value than what is a result of the SF97 and title? Is it something where you can license it up to the GVWR?
Thanks,
Bob