• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

FMTV CTIS system

byrdman1312

Active member
Steel Soldiers Supporter
147
154
43
Location
Parsons, TN.
Friends,
I'm having problems with my CTIS on a 2.5 ton FMTV. The front tires went down while sitting. I aired them up with an air compressor. When I started the truck all the lights flashed. On one wheel air was leaking around one of the connections. When I shut it down the leaking stopped.
Do these connections have O-rings or some other seal that may be bad, allowing the air to escape?
How do I fix this? Or should I disable the system? How do I disable the system?
Thanks!
Keith
 

Suprman

Well-known member
Supporting Vendor
6,860
693
113
Location
Stratford/Connecticut
Air up tires. Remove banjo bolt put plastic bag scrunched down over banjo and hose. Use rubber band to make airtight. If air is leaking thru the wheel valve the bag will expand.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks