Fuse block help (extra fuse)

[Small Prepper]

Afternoon

Looking at fuse block and and just realized I found an extra fuse coming out of the spare port (see pictures) to marker lights (right side). The extra fuse block was hot and was partly melted. (With a 30 amp fuse in it) (Had head light on for about 20 minutes) Looks to me that someone installed a jumper for the head lights (previous owner). Any ideas where to start looking for problem? I have been reading the TM's. Here's I have what I have done so far: Replaced head lights, replace all runnig lights, replace signal switch, replace wiper switch. (This jumper was already in, when I bought the truck)

Any help would be helpful


Thanks S.P.

 

[Warthog]

That diagram is not 100% accurate. Please read the updated fusebox layout in the CUCV Helpful Threads sticky.

Your melted fuse is the Headlight fuse which is also discussed in the CUCV Helpful Threads sticky

 

[jplace1011]

That diagram is not 100% accurate. Please read the updated fusebox layout in the CUCV Helpful Threads sticky.

Your melted fuse is the Headlight fuse which is also discussed in the CUCV Helpful Threads sticky

Hi Warthog, do you happen to have a link to the updated fusebox layout? Thank you for any help sir.

 

[joshuak]

Helpul Threads
https://www.steelsoldiers.com/threads/cucv-helpful-threads.123199/

Fuse box layout
https://www.steelsoldiers.com/threads/cucv-fuse-box-layout.132309/

 

[jplace1011]

Helpul Threads
https://www.steelsoldiers.com/threads/cucv-helpful-threads.123199/

Fuse box layout
https://www.steelsoldiers.com/threads/cucv-fuse-box-layout.132309/

This is Awesome and very helpful. Thank You Thank You for this help, I greatly appreciate it. I’m off to fusebox now!

 

[joshuak]

... I’m off to fusebox now!

You're certainly welcome. Check out that Helpful Threads page, a lot of work has been put into the those threads, as well as getting them all together in one spot.

Good luck with the fuse box!