• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Glow plug solenoid question

Rrent

Active member
110
142
43
Location
Texas
I recently acquired an ‘84 M1009 - just starting cleaning & repair(s). 1st on the list: belts, batteries, dog head mod. I’m guessing these pictures are both glow plug solenoids. If the new shiny one will work - I’ll order one. Not needed, but new parts are new parts.E48EEC0C-E27A-459E-80AC-1FA31140E42D.jpeg2A319F6C-D589-44D6-8E8F-CDDBFC787CEA.pngE48EEC0C-E27A-459E-80AC-1FA31140E42D.jpeg2A319F6C-D589-44D6-8E8F-CDDBFC787CEA.png
 

MarcusOReallyus

Well-known member
4,524
810
113
Location
Virginia
Well, it looks right, but without seeing the specs, it's hard to say.

The good news is, it's not a hard to find one. Literally, any parts store should have one.



It's not a mysterious uber-secret special military part. It's just a solenoid. They are everywhere.

Here's what you need to look for:

  • 4 terminals.
  • 100 amp continuous duty rating.
  • None of the 4 terminals have continuity to ground.

Any solenoid that meets those requirements will work just fine. (y)
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks