• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

HMMWV Fan Clutch Demons - Please Advise

BenDeez

New member
Steel Soldiers Supporter
22
0
1
Location
Dennisport, MA
This is the reservoir I have that I do not see in the diagrams with the Cadillac valve. No one else has this? Is it an older version? Screenshot_20181110-135556_Gallery.jpg first time with a picture, hope it works
 

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,257
3,863
113
Location
Brentwood, Calif
And why do you have a 60amp installed ? That setup requires a 200amp, does not take much for it to be off and you will have issues with belts and tension.
 

BenDeez

New member
Steel Soldiers Supporter
22
0
1
Location
Dennisport, MA
Thank you, that is what I needed to know. Why could I not find a diagram showing the reservoir and the cadillac valve?

You had told me a couple months ago to do the 200 amp, it will be done this winter. I have already started gathering supplies.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks