MatthewH
Member
- 401
- 3
- 18
- Location
- Boyne City Mi
I currently run an M887 as my personal shop/welder truck for my welding/fab buisness.
I am wondering if the Hobart Welder/Generator can be converted to run 220v. The tag lists the genny as a 4kw, and it only offers 110v now, but am interested in being able to run 220v tools like a plasma cutter or a smaller mig welder, like a Hobart 180.
Future plans are to swap out the current setup for a diesel wleder/genny, like a Miller Trailblazer, or Lincolns equivlant, but funds aren't avalable at tels moment.
Any comments/ suggestions are appreciated
Thanks
MatthewH
I am wondering if the Hobart Welder/Generator can be converted to run 220v. The tag lists the genny as a 4kw, and it only offers 110v now, but am interested in being able to run 220v tools like a plasma cutter or a smaller mig welder, like a Hobart 180.
Future plans are to swap out the current setup for a diesel wleder/genny, like a Miller Trailblazer, or Lincolns equivlant, but funds aren't avalable at tels moment.
Any comments/ suggestions are appreciated
Thanks
MatthewH