• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Injector Questions

houdel

Active member
1,563
8
36
Location
Chase, MI
A few general questions on injectors

1) Does anyone know where to get the plugs to close off the injector ports while the injectors are out, or a suggest a good field expedient plug?

2) Where do you get replacement gaskets for the injectors?

3) Do the gaskets need to be replaced everytime you pull an injector?

4) How much do new injectors cost?

5) How much does it cost to test & repair/rebuild an injector?
 

red devils dude

New member
1,958
3
0
Location
Ft Campbell
ok lets see....
1. local fuel injection shop
2. local fuel injection shop
3. the copper washers do
4. $50+- from surplus suppliers eg white owl
5. A fuel injection shop will will usually test them for free for me it was more to rebuild then to buy a new one.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks