- 8,392
- 2,408
- 113
- Location
- Monrovia, Ca.
GENERAL STEEL TANK CO. LIQUID FUEL FILTER SEPARATOR, PN 0212-ZZZ000, SKID MOUNTED, 6 INLET AND OUTLET CONNECTION, 150 PSI RATING, 600 GAL PER MIN
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Is this a centerfuge?
- Thread starter WillWagner
- Start date
- 8,392
- 2,408
- 113
- Location
- Monrovia, Ca.
Sorry, let me see if I can make it bigger
Attachments
gimpyrobb
dumpsterlandingfromorbit!
- 27,785
- 747
- 113
- Location
- Cincy Ohio
Hard to say with out seeing inside. It is deffinately built for pressure retention!.
- 3,585
- 7
- 0
- Location
- Parkville, MD
Being in Korea I would say it is a rice cooker for a big party....but let me check the NSN and I will post what I find. It is coming up as a non valid LIN and that would indicate either it is an off the shelf one time buy or dropped from the inventory.
Looking at it I would say it is new and thus bought for a good idea and canceled for some reason. I doubt that it is a centrifuge in that it would require a big motor to spin the fuel. It may use a vortex to spin the fuel inside but it would not technically be a centrifuge or Iran would be bidding on it.....
Looking at it I would say it is new and thus bought for a good idea and canceled for some reason. I doubt that it is a centrifuge in that it would require a big motor to spin the fuel. It may use a vortex to spin the fuel inside but it would not technically be a centrifuge or Iran would be bidding on it.....
davemccoull
Member
- 93
- 2
- 8
- Location
- Nelson Lancs U.K.
Happy new year will
I don,t think it,s a centrifuge, it looks more like a reactor vessel, the motor on top will probably drive a paddle.
I don,t think it,s a centrifuge, it looks more like a reactor vessel, the motor on top will probably drive a paddle.
Blood_of_Tyrants
Active member
- 1,614
- 10
- 38
- Location
- Lebanon, TN
I would guess that it is a big honking fuel-water separator.