• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

LMTV 4-Pin Electrical Connectors

jmumme

New member
6
0
1
Location
Woodinville, WA
In taking apart the LMTV cab, I found the Heater plug had melted. Was wondering if anyone knew where to purchase the 4-pin rubber electrical connectors? I find a lot of the single pin packard fittings, but not the 4 pin. Here are some pictures of the fitting. One is of the melted fitting, the other two are from behind the dash gauge panel and I believe are the same connector. Any help is appreciated! Thanks!IMG_0795 (1).jpgIMG_0794 (1).jpgIMG_0793 (1).jpg
 

Third From Texas

Well-known member
2,704
6,327
113
Location
Corpus Christi Texas
Now would be a great time to cut out the military connector and replace it with a civilian 4-wire plug.

Pros:
1) Less expensive
2) Easily acquired

Cons:
1) May not come in military green
2) No fun to hoard
3) Cannot resell for 500% markup
 

jmumme

New member
6
0
1
Location
Woodinville, WA
Now would be a great time to cut out the military connector and replace it with a civilian 4-wire plug.

Pros:
1) Less expensive
2) Easily acquired

Cons:
1) May not come in military green
2) No fun to hoard
3) Cannot resell for 500% markup
Haha, Yes, more than likely going with a civilian Deutsch connector as a plan B.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks