m1008 on WMO

[Iceman3005]

I just started to run WMO in one of my cucv's, I have about 80 gallons of wmo that I filtered through a 5 micron filter into on of the 250 gallon tank I have. My fuel tank was about half full of diesel fuel, yesterday I topped it of with the filtered WMO, so the mix should be about 50/50. Truck had a hard time starting this morning, it was only 45 degrees out, but it did start really easy after work at about 75 degrees. going to try a 70% WMO Saturday after work. Smokes a lot at an idle but mostly clears up when cruising down the road.

 

[islandguydon]

Hey Jonesville, are you running a 6.2...? The most I ever added was 5 gallons to the 15 of diesel fuel. I had to run that out on a road trip there was to much smoke and the truck was a hard start after the experiment. I went back to a quart of oil per tank. Good luck.

 

[patracy]

Careful... the roostamaster pumps aren't the strongest injection pumps out there.

 

[73m819]

REMEMBER that the Ip IS NOT like a multi ip whers you can run CRAP though it, you could end up with a ONE mission truck (a true wheel chock)

 

[Iceman3005]

islandguydon Yes it is the 6.2, seems too run pretty good on the 50/50 blend. Ya patracy I really am reluctant to take this too far, have the wife almost convince to let me buy a 5 ton multi-fuel.

 

[patracy]

At least the 6.2 injection pumps are relatively cheap to replace when they die...