M101 Dimensions Needed! (Not in TM)

[SixSpeed]

Hey Guys,

Looking for the following dimensions

A.) Front of bed to arch center
B.) Rear of bed to arch center
C.) Total outer bed length (A+B)
D.) Total outer bed width (Couldn't find a picture)

 

[319]

Hey Guys,

Looking for the following dimensions

A.) Front of bed to arch center
B.) Rear of bed to arch center
C.) Total outer bed length (A+B)
D.) Total outer bed width (Couldn't find a picture)

M101A1 or M101A2 (in case they'e different)?

 

[dougimes]

overall bed length (outside edges) 96"
measure the rest for you later today

 

[AaronW]

I just put a tape on my 101A2

A=56"
B=44"
D=70"

All from outer edge of top rail. Bottom is longer/wider

 

[Green_gator]

Jack,
If you want to take measurements or check something you are always welcome to come on over and poke and prod around my trailer.

 

[Recovry4x4]

Walter's -A3 will be a little wider at the fender wells! If you think a 101A1 or 101A2 is usefull, you would really love the -A3. 55" between the inner fender wells.

 

[SixSpeed]

Are A1's and A2's different?

 

[Corprin]

Are A1's and A2's different?

Only in the axle/hubs and the lunette assy (brake vs no brake)

... and the A2's were more commonly upgraded with the rear landing leg, I seldom saw an A1 with one. (not to say they don't exist, just never saw one with my own eyes.)

 

[xiongy]

Guys,

For an m101a2, I'd like to know:
E.) Width between wheel wells

Thanks!

 

[xiongy]

OK, a little more searching and I found the answer: 45"

Looks like I'll be waiting for an m101a3!

 

[cessnatwin]

You want Pete and I to tow that too? come on man!