• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M101A2 shock replacement

Tinstar

Super Moderator
Super Moderator
Steel Soldiers Supporter
4,256
1,707
113
Location
Edmond, Oklahoma
Ok
I assume they are a direct replacement fit?
I would have to paint them and get a black dust boot.
That's just me.


Last weekend was doing some dirt work on the ranch.
My brother was running the tractor and I wanted some fill dirt loaded in the M101A2.
Wasn't paying attention as I was doing a different chore and he put several loads of dirt in trailer.
Piled it up to the middle of the side panels. VERY heavy.
Waved off another bucket he wanted to dump and looked under trailer.
Springs were way down and bed was riding on rubber bumpers. Close to 3+ tons of dirt.
Drove around ranch filling in small places I wanted.

Once dirt was removed, all was good and springs came right back. Bumpers also.
Luckly I always run E Rated tires on everything.

Point of story is
The Monroe shocks also did great and handled a very, very overloaded trailer, just fine.
 

KCJAG

New member
3
1
3
Location
KANSAS CITY
Ok
I assume they are a direct replacement fit?
I would have to paint them and get a black dust boot.
That's just me.


Last weekend was doing some dirt work on the ranch.
My brother was running the tractor and I wanted some fill dirt loaded in the M101A2.
Wasn't paying attention as I was doing a different chore and he put several loads of dirt in trailer.
Piled it up to the middle of the side panels. VERY heavy.
Waved off another bucket he wanted to dump and looked under trailer.
Springs were way down and bed was riding on rubber bumpers. Close to 3+ tons of dirt.
Drove around ranch filling in small places I wanted.

Once dirt was removed, all was good and springs came right back. Bumpers also.
Luckly I always run E Rated tires on everything.

Point of story is
The Monroe shocks also did great and handled a very, very overloaded trailer, just fine.
I couldn’t find any of these shocks except for the Rancho RS5226


Sent from my iPhone using Tapatalk
 

Tinstar

Super Moderator
Super Moderator
Steel Soldiers Supporter
4,256
1,707
113
Location
Edmond, Oklahoma
Looks like the 32283s are discontinued.
Some are still on eBay.

Figures.
Find something that works well and they quit making it.
 

KCJAG

New member
3
1
3
Location
KANSAS CITY
Looks like the 32283s are discontinued.
Some are still on eBay.

Figures.
Find something that works well and they quit making it.
On another thread I found that the 37114 was the replacement. Advanced Auto had them in stock so I’m picking them up tomorrow and seeing if they fit.


Sent from my iPhone using Tapatalk
 

KCJAG

New member
3
1
3
Location
KANSAS CITY
Very good

Thanks for posting the current P/N.


I guess someone thought that duct tape would stop the leaky shocks? Lol. These new shocks fit great. Same bushings and all. It brought back memories wrenching in my Gore-tex coat and pants while laying in the rain. #goArmy



Sent from my iPhone using Tapatalk
 

TITANBOW

Member
26
51
13
Location
Longmont


I guess someone thought that duct tape would stop the leaky shocks? Lol. These new shocks fit great. Same bushings and all. It brought back memories wrenching in my Gore-tex coat and pants while laying in the rain. #goArmy



Sent from my iPhone using Tapatalk


You know, in hindsight, I remember all the M101s I saw when I was in, tended to have old 100mph tape around the shocks LOL.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks