• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M107 1953 "water" trailer Paint/liner

SSG Gibb

Member
589
0
16
Location
Schuylkill County Pa
So I've got this M107 it's in good shape for the years it's been around. I planned on using it to store my WMO but am concerned that the "Paint" lining that is flaking up will melt mix in with gasoline, kerosine, tranny fluid ETC. Has anyone had any experience in this department? Any help would be GREATLY Appreciated.
 

NDT

Well-known member
Steel Soldiers Supporter
10,163
5,839
113
Location
Camp Wood/LC, TX
If it's already flaking, the VOCs will only accelerate the process. Get some of those super cheap 330 gallon IBCs for your oil.
 

SSG Gibb

Member
589
0
16
Location
Schuylkill County Pa
Thanks NDT for the heads up. is there any way to get this stuff "paint" out so I can use the pod for fuel?
What's wrong Steve, are/were you thinking of doing the same thing? Or don't you like the idea of using the trailer for Fuel?
 

SteveKuhn

New member
1,227
4
0
Location
Hasbrouck Heights NJ
No, I wuz' jus' disappointed with NDT's answer. 'member I'm clean diesel.

Jack says forestry used them all the time for off road gas and diesel in the woods. He saw the trailer before I picked it up.

Steve
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks