• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M54 where to tap air for seat?

SandBar

Full Time Patriot
755
231
43
Location
GA/FL
Where is the recommended location to T in for air to use in an air seat install? Thanks!
 

US6x4

Well-known member
Steel Soldiers Supporter
1,188
2,077
113
Location
Wenatchee, WA
I think i read many years ago that the air should come from the air horn circuit because if the seat leaks it won't bleed the air tanks dry. Sorry my answer isn't more precise than that. A bit of searching may reveal those old threads I'm remembering.
 

G744

Well-known member
Steel Soldiers Supporter
1,589
3,476
113
Location
Hidden Valley, Az
Another small-diameter circuit is that feeding the F-R selector valve on the transmission that controls the transfer. That is if you have the M39 series or the 800-series.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks