• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

M870A1 Rear Axle

Mustangsud

Active member
154
216
43
Location
Aubrey, TX (North DFW Metro)
Does anyone know where I could find a rear trailer axle assembly? The part number is D22AX503-209. I'm not having much luck finding it by internet search. It's the rear axle of the 40 ton low boy M870A1.
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,088
9,248
113
Location
Mason, TN
I looked. I was never able to find one. Other than load king directly.

I looked at doing a 25k meritor axle since I've got 3. Cutting it to length and rewarding it and welding the lock strips on it. It's the same tube size however it would have bigger brakes and be hub pilot over dayton.
 

Mustangsud

Active member
154
216
43
Location
Aubrey, TX (North DFW Metro)
Apparently, the trailer was involved in an accident in the military. It looks like a vehicle hit the trailer right at the back axle. The rim and tire are toast for sure. We haven't pulled it all apart yet, but it looks like the axle housing is broken.
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,088
9,248
113
Location
Mason, TN
Apparently, the trailer was involved in an accident in the military. It looks like a vehicle hit the trailer right at the back axle. The rim and tire are toast for sure. We haven't pulled it all apart yet, but it looks like the axle housing is broken.
If it just took out the spindle then those can be cut off and a new one welded on. Axle housings can be welded. Or you can use a longer axle and cut it down and they tube spline it and weld it
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks