tcruwithme
Member
- 244
- 20
- 18
- Location
- Eagan, MN
Hello,
I am not a mechanic, so I hope you can give me some guidance. I read through the TM, and I found some pictures of where I have fuel leaking in my MEP-802A. I just replaced the liquid level sensor today, and as luck would have it, now I have a fuel leak.
It's leaking at both injector fuel pipes where they run into the injection pumps (I think that's what it is). Fuel bubbles at the base where the nut is, and fuel leaks out and pools. The injector pipe nut is tight as is the delivery valve holder. Here's the area I am talking about:
What do I start with? So far, I have the top off. That's when I thought to ask the experts.
I am not a mechanic, so I hope you can give me some guidance. I read through the TM, and I found some pictures of where I have fuel leaking in my MEP-802A. I just replaced the liquid level sensor today, and as luck would have it, now I have a fuel leak.
It's leaking at both injector fuel pipes where they run into the injection pumps (I think that's what it is). Fuel bubbles at the base where the nut is, and fuel leaks out and pools. The injector pipe nut is tight as is the delivery valve holder. Here's the area I am talking about:
What do I start with? So far, I have the top off. That's when I thought to ask the experts.
Last edited: