• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

mep806b

E

eracer08

New member
1
0
1
Location
Hawaii
I'm working on a mep806b with a lot of issues: unable to adjust voltage (stuck at 208v); unable to adjust frequency (stuck at 43 hertz); circuit interrupter won't close. The tm says to replace I/o module. I swapped all modules individually with a known good genset and no change. Has anyone had similar issues?
 
Last edited:
You must log in or register to reply here.
112,902members
166,382threads
2,343,150posts
871online users
Top