Need dimensional help with GPW part

[Tinwoodsman]

Is there anyone who can give me the following measurements on a early model oil fill dipstick?

1. Length of dipstick from the bottom of the cap to the end of the dipstick.

2. Length from the bottom of fill cap to the "fill" line.

3. Length from the bottom of fill cap to the "empty" line.

4. Diameter of the round disk near the middle of the dipstick and the length from the bottom of the cap to the disk.

I have the cap and a dipstick I can modify but just need the measurements.

Thanks.

 

[GPWWLA]

I see this a few months old and I don't know if you still need the help. Would the dipstick differ from Willy's to Ford? If not, I can measure the one from my 41 MB.

 

[Tinwoodsman]

The dipsticks should be the same length. The early GPW oil gauge had a loop handle on the top versus the two ears on the MB and later GPW