• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Need some info on ms51073-1 dome light

eeyore357

New member
52
0
0
Location
B'Ham AL
I just got finished installing the dome light and the blue light isn't working and the white light turns on in what I thought was the off position. What are the positions of the switch?
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,196
314
0
Location
gainesville, ga.
I did away with the lock tab, now I just reach back and move the switch lever, don't have to have to have my hand placed right to push the button. While night driving, I leave the blue light on (would like to find a red lenses), when I need the bright light, it is a easy flip of the switch.

As a side note, I have had a few of these lights that had a bad switch where the switch was forced passed the on point.
 
Last edited:

eeyore357

New member
52
0
0
Location
B'Ham AL
Thanks! Probably a bad bulb or I didnt clean one of the contacts good enough. Just glad the switch is working in the correct position.
 
Top