- 7,350
- 10,313
- 113
- Location
- Papalote, TX
A member asked me in a PM to elaborate on how I installed the offset mounts on the Detroit, so I thought I would put it in a thread, so all could see and comment.
Not saying this is the only way, just the way I did it.
The two holes used on the rear are probably already in the body.
It is pretty simple I spaced the mount back 1/2" using some 1/4X1" aluminum bar on the two rear bolts so the mount would clear the top, I had to also clearance the mount to clear the top (remove the radius). I put a bar on the inside of the rear mounting bolts and large heavy washers on the side bolts, yes one could be longer but the mount is hell for stout.
Not saying this is the only way, just the way I did it.
The two holes used on the rear are probably already in the body.
It is pretty simple I spaced the mount back 1/2" using some 1/4X1" aluminum bar on the two rear bolts so the mount would clear the top, I had to also clearance the mount to clear the top (remove the radius). I put a bar on the inside of the rear mounting bolts and large heavy washers on the side bolts, yes one could be longer but the mount is hell for stout.
Attachments
Last edited: