cjkeeliii
New member
- 165
- 4
- 0
- Location
- Thomasville, GA
I had to unhook my p/s pump for repairs and now can't remember which hose goes onto which pipe. Does anybody have pics or does the TM say anything about which is inlet and which is outlet?
PS: There about 3 nuts and two bolts holding the thing onto the engine--be careful to loosen all of them before you attempt adjustment or belt replacement. There are three adjustment brackets that must be loosened. I poked a hole in my pump's resevoir and had to have it welded back.
1985 M1008
PS: There about 3 nuts and two bolts holding the thing onto the engine--be careful to loosen all of them before you attempt adjustment or belt replacement. There are three adjustment brackets that must be loosened. I poked a hole in my pump's resevoir and had to have it welded back.
1985 M1008