macona
New member
- 6
- 1
- 1
- Location
- Beaverton, OR
Picked up a PU-26A/U
Picked up one of these seemingly rare beasts the other day. In good condition for the most part. Had an exhaust leak and low compression in once cylinder, all others over 100PSI, it was a bent valve with vise grip marks which took out the valve guide. Paid $550 for it, going to use it to power a three phase electron beam power supply.
Came out of a fire station up by seattle, was a standby generator at a fire department up until about 8 years ago.
Missing a couple parts like the exhaust which is the same as a PE-95, so if anyone has one they are parting out, please let me know. Also need a oil cup for the air filter. Also need couple pieces of sheet metal which I should be able to fab up.
https://www.youtube.com/watch?v=_Wo08c19990
Picked up one of these seemingly rare beasts the other day. In good condition for the most part. Had an exhaust leak and low compression in once cylinder, all others over 100PSI, it was a bent valve with vise grip marks which took out the valve guide. Paid $550 for it, going to use it to power a three phase electron beam power supply.
Came out of a fire station up by seattle, was a standby generator at a fire department up until about 8 years ago.
Missing a couple parts like the exhaust which is the same as a PE-95, so if anyone has one they are parting out, please let me know. Also need a oil cup for the air filter. Also need couple pieces of sheet metal which I should be able to fab up.
https://www.youtube.com/watch?v=_Wo08c19990
Last edited:
