nickd
Active member
- 867
- 44
- 28
- Location
- Newport, Delaware
Here are a few shots of the mount I made up to accept the pedistal I am picking up at aberden. The mount is made up of unistrut and consists of 2 units made up of 1 lingth of 1-5/8" back to back strut as the main runner with a short piece of 1-5/8" strur welded on each end to accept the pipe clamps that hold the mount to the frame rails. Once strapped to the frame rails the pedistal will be bolted to the mount using spring nuts. Final cross pieces will be positioned once the pedistal is in hand.
