fpchief
Well-known member
- 1,041
- 218
- 63
- Location
- South Alabama
My r-case drain plug is rounded out. Anyone have any suggestions? I have tried putting a flathead in beside the ratchet to tighten it up but not having any luck.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Transfer case drain plug
- Thread starter fpchief
- Start date
Buy a large bolt that will fit in it shorter the better. Take your welder and weld the bolt into it. Or weld a 1/2" extension into it or Whatever fits it
It is a typical pipe plug fitting if I remember right so a replacement is easy to locate
The weld will also loose the threads up as well on the plug for removal
It is a typical pipe plug fitting if I remember right so a replacement is easy to locate
The weld will also loose the threads up as well on the plug for removal
Last edited:
fpchief
Well-known member
- 1,041
- 218
- 63
- Location
- South Alabama
Thank you.