- 9
- 8
- 3
- Location
- Northern Arizona
Complete White 465-C motor with rebuilt injectors and rebuilt injection pump. Ran fine when taken out a couple years ago. Possibly has a small head gasket leak, noticed what looked like some coolant dried on the back of the head, but no other symptoms.
Engine tag shows a rebuild in the 80s. Truck it came out of was a stateside national guard rig, so doubt it had many miles put on it.
Needs new hoses and belts, but comes with new oil and fuel filters already installed.
Mounted on wooden support pallet for transport. Weighs about 1700lbs. It has been stored inside a warehouse for about two years, so it's been protected from the elements.
I need to sell it, not doing well and need to downsize some stuff. I am asking $2000 for the whole thing and including a used radiator. I also have some spare used, but good condition injectors I'll throw in with it.
Located in Prescott Valley, Arizona. The shop holding it for me has a forklift and can load it into a truck or on a trailer. Unloading will be the buyers responsibility. It does move fairly easily with a regular pallet jack, despite the weight.
Great for a new project or just if you want something for spare parts.
Please reach out at my email, 4213wjw@protonmail.com if you are interested.
Engine tag shows a rebuild in the 80s. Truck it came out of was a stateside national guard rig, so doubt it had many miles put on it.
Needs new hoses and belts, but comes with new oil and fuel filters already installed.
Mounted on wooden support pallet for transport. Weighs about 1700lbs. It has been stored inside a warehouse for about two years, so it's been protected from the elements.
I need to sell it, not doing well and need to downsize some stuff. I am asking $2000 for the whole thing and including a used radiator. I also have some spare used, but good condition injectors I'll throw in with it.
Located in Prescott Valley, Arizona. The shop holding it for me has a forklift and can load it into a truck or on a trailer. Unloading will be the buyers responsibility. It does move fairly easily with a regular pallet jack, despite the weight.
Great for a new project or just if you want something for spare parts.
Please reach out at my email, 4213wjw@protonmail.com if you are interested.
Attachments
-
109.4 KB Views: 5
-
97.9 KB Views: 5
-
98.3 KB Views: 5
-
74.4 KB Views: 5
-
74.1 KB Views: 5
-
56.7 KB Views: 4
-
79 KB Views: 4
Last edited: