You appear to not be logged in. Do you need your password reset? If so click this link https://www.steelsoldiers.com/login.php?do=lostpw
Steel Soldiers is supported by:
How well is this set up working? Can this be done with the older v belt 3116? Thanks!Ava8or in florida had the MTVR kit that will work on a 3116 or 3126 motor![]()
![]()
![]()
![]()
![]()
Sent from my SM-G935P using Tapatalk
Sounds great! Does the bracket mount to the alternator mounting bolts or another area? Would be great to see a photo of what it mounts too. Is that a custom pulley on the alternator, or just 2 pulleys? Thanks!Blows 41 when it is 90 to 95. I am sure it would. You could just use one of the V belts off the alternator if you can get the compressor in line with it.
Correction I took off the lower mount that was on the motor mount. Just need the compressor and lines.I have everything but compressor and the AC mount that mounts on the motor mount. The AC motor mount bracket I already installed and not going to take it off. Believe I bought Gen 2 unit.
Do you have the driver side or passenger side mount?Correction I took off the lower mount that was on the motor mount. Just need the compressor and lines.