-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Latest activity
What's new
BMI
Midwest Military Equipment
Eastern Surplus & Equipment Co
-
GCecchetto replied to the thread Petlas 395-85 R20 tires.No parking brake is completely failsafe when total neglect of maintenance has gone on for years. Wheel chalks are easy enough to carry... -
wandering neurons replied to the thread Petlas 395-85 R20 tires.Spring brakes are great as a fail-safe, but they are not 100% perfect. When I got my M1081, all the springs in my spring brakes were... -
SSan Diego baja replied to the thread MEP-362a.Hey guys is this still located somewhere on the forum? I checked the uploads and couldn’t find the tm for an Mep-362a
-
EWhat do you mean by idle? There is no idle. It is supposed to run at normal speed all the time. You mean running at no load, 60 hertz...
-
if it is controlled by a switched power source off of an ignition hot wire, then in theory it should NOT be drawing power with the... -
I have a M1009 that I was planning on replacing the lift pump and ip and looked all over for encouraging articles after hearing so many... -
Ok, so it was the 1/2" NPT fitting that works perfectly. NAPA didnt have anything in stock in right angle, but this one works great... -
BeStihl reacted to cbrTodd's post in the thread Aftermarket fuel/water separator drain mod with
Like.
I did some measuring of the plug on one of the Napa 3472 filters and it came out to 3/8-28, straight threads (not tapered). That is... -
Jjmak replied to the thread Alternator Suggestions?.It's not touching the boot, but even if it was it's just the protective shroud around the fan blade so should be fine.. been a few...
-
KTake a look at my sectional drawing of a typical HMMWV tire/wheel assembly.... (everything is exactly to scale) I'm sure you can see...
-
KI cut the runflat through on opposite sided (cut into 2 pieces) with a Sawzall equiped with a blade for cutting wood/branches. Then I...
-
KKevin Means replied to the thread Alternator Suggestions?.Wow! That's a big help jmak. Thank you. I see your 260 is right up against that "boot" that connects to the exhaust. I unbolted mine and...
-
Kknutz340 reacted to M1165A1's post in the thread BFGoodrich Baja TA vs Goodyear Wrangler MT? with Like.
There has been an advisory on MT/Rs for catastrophic sidewall failures that have led to rollovers and deaths...
-
Jjmak replied to the thread Alternator Suggestions?.Here are pics. It was a very easy upgrade from the 100a alt. Only gotcha is the 260a alt seems to use metric for everything- the spindle...
-
-
Jjmak replied to the thread Alternator Suggestions?.Not sure where the concern about the shock tower thing on older trucks is coming from- I have a 98 1078 A0 (3116) and the n1224 dual...
