-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Latest activity
What's new
BMI
Midwest Military Equipment
Eastern Surplus & Equipment Co
Staff online
-
GuyfangModerator
-
Scoobyshep replied to the thread MEP-114A GPU.Now that I've had more caffeine, there are 2 fuel pumps plumbed in series. Then the water seperator and primary filter. This goes... -
Finished today the Airlines and the Tank We filled the tank with the shopcompressor as we still have not purchase a compressor for...
-
Guyfang replied to the thread MV of the month August nomination.I toured the Bone Yard in 1962? I was 8 years old, and in love with aircraft. My fathers uncle worked there. We drove around for maybe 2...
-
I didn't want to remove anything (could be another can of worms) so I always have done the heat treatment. Not talking about glowing...
-
thank you everyone for the info, I appreciate it. I went through so many TM's I never saw that picture. thank you again.
-
GLow oil will come on when the unit is placed in run (no pressure). After you start it flopping the reset switch should reset the fault...
-
PHOENIX-GER replied to the thread Rebuilding after 15 years of storage.Finished today the Airlines and the Tank We filled the tank with the shopcompressor as we still have not purchase a compressor for... -
-
Scoobyshep replied to the thread MEP-114A GPU.Low oil will come on when the unit is placed in run (no pressure). After you start it flopping the reset switch should reset the fault...
-
M813rc replied to the thread MV of the month August nomination.As Mullaney said, that is the MASDC portion of Davis-Monthan AFB outside Tucson Arizona. (MASDC- Military Aircraft Storage and... -
M813rc replied to the thread New M1165 owner.Good looking truck. And I like your flag! Semper Fi, brother. Cheers
-
I've wanted a HMMWV since leaving the service in 2005 and was finally in a position that I was able to pull the trigger on one. The...
-
deank reacted to Sharecropper's post in the thread Kinda got carried away..... M1028 rebuild with
Like.
Decided to finish installing & plumbing the electric fuel pump. I used a Carter P4600HP which is a 12v, 50 gallon/hour 4.5-8 psi... -
AHello group, my partner snagged a MEP0114A GPU for me to fix and get running (was retrofitted with a 28v DC starting unit for aircraft...
-
2Thank you for clarifying. I did pull out the push rods and they looked good. I didn't roll them on a flat surface. I'll keep digging in...
-
M813rc replied to the thread Another, but unique ID request.Agree with the above, M1031 box. The ladder is part of the modifications for trailer mounting, not original to the box. Same for the...
-
