• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Latest activity

What's new

What's new New posts New profile posts Latest activity

BMI

Midwest Military Equipment

Eastern Surplus & Equipment Co

Members online

Total: 4,823 (members: 25, guests: 4,798)
  • Guyfang
    Guyfang replied to the thread MEP-114A GPU.
    Then its not a Mode 2 set. Its a MEP-114A....................... If its 400 hertz, its a MEP-114A
  • Guyfang
    Guyfang reacted to Scoobyshep's post in the thread MEP-114A GPU with Like Like.
    Do something quick for us to help eliminate further confusion. Look at your hertz gauge. What's it's reading range? Around 50-60 or...
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    Ok. Thanks for clarifying, engine wise not much changes but electrically it makes a difference. As Guy pointed out, this is not a 005a...
  • Guyfang
    Guyfang reacted to Scoobyshep's post in the thread MEP-114A GPU with Like Like.
    For everyone's sanity, the radiator is the front and the control panel is the rear. These fuel pumps are extremely simple and I...
  • Guyfang
    Guyfang replied to the thread Military Vehicle, Recovery Vehicle, Full-Tracked: Medium, M88A2, (NSN 2350-01-390-4683).
    TM 9-2815-247-34 dated 2000 DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR ENGINE WITH CONTAINER: TURBOSUPERCHARGED, DIESEL...
  • A
    azreark1 replied to the thread MEP-114A GPU.
    It is a 400hz unit, and yes we are at an airport. The usefulness of the 28vdc 1000amp starting power is the end use of the unit, there...
    • IMG_8818D779-5BB8-4403-A43E-F55269BFCD08.jpeg
    • IMG_0A8778B1-E7F4-4D5F-95DE-3241BB3CF3F3.jpeg
    • IMG_FB751D57-46FF-4B08-94F5-F898002BE3A7.jpeg
  • Reworked LMTV
    Reworked LMTV reacted to Smike740's post in the thread LMTV Air Conditioner with Like Like.
    Here is a wiring diagram I had, not sure if this exactly for your unit, regardless everything should be wired the same. This schematic...
  • Commander5993
    Commander5993 reacted to WWRD99's post in the thread CUCV early Glow Plug burn out - What is the cause? with Like Like.
    I don't think I've ever done a pump where that shaft didn't fall down into the cover pocket. I always pop it out and cover it in grease...
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    Do something quick for us to help eliminate further confusion. Look at your hertz gauge. What's it's reading range? Around 50-60 or...
  • Guyfang
    Guyfang reacted to FarmingSmallKubota's post in the thread Mep 831A load issues with Like Like.
    did you add the fan load of the load bank to your load amount?
  • Scoobyshep
    Scoobyshep replied to the thread MEP-114A GPU.
    For everyone's sanity, the radiator is the front and the control panel is the rear. These fuel pumps are extremely simple and I...
  • A
    azreark1 replied to the thread MEP-114A GPU.
    Thats a lot of good points. Some diesel injection pumps will pull past INOP pumps so wasn't sure if that applied to this model. So this...
  • Guyfang
    Guyfang reacted to M813rc's post in the thread Another, but unique ID request with Like Like.
    Agree with the above, M1031 box. The ladder is part of the modifications for trailer mounting, not original to the box. Same for the...
  • Guyfang
    Guyfang reacted to Tinstar's post in the thread Another, but unique ID request with Like Like.
    Whomever married the box and trailer together did a good job from the topside at least. That definitely looks like CUCV SECM body as...
Show older items
113,898members
166,962threads
2,350,756posts
4,824online users
Top