-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Latest activity
What's new
BMI
Midwest Military Equipment
Eastern Surplus & Equipment Co
-
Bulldogger reacted to Toolslinger's post in the thread Replacement canvas or vinyl covers with
Like.
While I haven't done tarps, I have pushed a ton of heavy material through a post war Singer 15 clone. Dead simple machine, nothing... -
M813rc replied to the thread Another, but unique ID request.Outstanding! Looking forward to seeing more. :naner: This is what used to be inside that left front door. Cheers -
-
oh I bought it! More pics soon.
-
Guyfang replied to the thread MEP-114A GPU.Yeah i think youre right for it being an air leak source, and also correct on the location, that is from the fuel selector to the first... -
GYea thats how I am planning mine, evap in front of the recirc port with a drip pan and drain. All inside a vented center console that...
-
RRonmar replied to the thread LMTV AC parts diagram..Yea thats how I am planning mine, evap in front of the recirc port with a drip pan and drain. All inside a vented center console that...
-
So the GPU box is a Hobart TR-1528, snagged a manual and was going through it. The panel is missing a switch so referenced the manual...
-
I built a heater for my 004 which consists of three water heater elements that I just submerge in a tank of water. Without factoring in...
-
Pretty much anything without a motor would be the general blanket statement. Heaters and incandescent light bulbs really don't care...
-
The frequency gauge should be before the output contactor so it should indicator frequency even if the main contactor is off. I would...
-
Yeah i think youre right for it being an air leak source, and also correct on the location, that is from the fuel selector to the first...
-
Guyfang reacted to marchplumber's post in the thread My Dad loved my M1009 CUCV TNARNG #04 with Like.
VERY NICE!! Thank you for sharing!! My sincere condolences for your loss..................... Nice TRK!! Kewler pics of your Pops!
-
Ggrywitt replied to the thread Mep 831A load issues.This oil looks as dark as the last and it has about 2.5 hours. Rings? I don't see metal but that is really sootie for 2 hours that...
-
-
GGeneralDisorder replied to the thread LMTV AC parts diagram..Just put the evap core and expansion valve in front of the recirculation vent inside some sheet metal. Valve off the heater core, and...
-
The attached document doesn’t really have compatibility listed, but it will show part numbers for the different pumps and hydraulic heads.
