• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Latest activity

What's new

What's new New posts New profile posts Latest activity

BMI

Midwest Military Equipment

Eastern Surplus & Equipment Co

Staff online

Members online

Total: 1,032 (members: 13, guests: 1,019)
  • Mullaney
    Mullaney reacted to G744's post in the thread M38 pintle hitch with Wow Wow.
    A strong ball is indeed better than a small one;) All the failures but one were due to crappy couplers on the trailers. The one was a...
  • Mullaney
    Mullaney reacted to LuckeyD's post in the thread New to me MEP-803a with Like Like.
    Great! I recommend keeping loads under 50A per phase as the main gen is good for just over 100 AMPS total and you split it using 2...
  • Mullaney
    Mullaney reacted to Ray70's post in the thread MEP 803a governor question with Like Like.
    Check the large wires going into and out of K1, especially the ones leaving K1 and going to the lugs. Where the wires bend and go...
  • Mullaney
    Mullaney reacted to SQF's post in the thread MEP 803a governor question with Like Like.
    Ok all, not sure what I did but two new pumps later it runs great. My only caveat is it shut off slightly slower than our other 803. I...
  • Mullaney
    Mullaney reacted to Guyfang's post in the thread MEP 803a governor question with Like Like.
    https://www.steelsoldiers.com/threads/all-the-tms-needed-for-the-mep-803a-10-kw-generator-set-additional-information.213028/
  • Mullaney
    Mullaney reacted to Ray70's post in the thread MEP-003a oil changes with Love Love.
    It will have to be Lunch then.... with your brewing background I suspect any beer I could offer you from America would rate somewhere...
  • Mullaney
    Mullaney reacted to goldneagle's post in the thread My new hobby: Wood military vehicles with Like Like.
    Burned some leaves and debris from the area I cleared last week. Cut up some small saplings growing randomly in the yard and burned...
  • Mullaney
    Mullaney reacted to Irwin m Fletcher's post in the thread 2000 HMMWV M1123 Project with Like Like.
    Nice work. I threw a couple of 6x9s into the rear seat boxes and used clear 1/4” plexi & sound-damp two-sided tape on the lips for the...
  • R
    Ray70 replied to the thread MEP-003a oil changes.
    It will have to be Lunch then.... with your brewing background I suspect any beer I could offer you from America would rate somewhere...
  • R
    Ray70 replied to the thread MEP 803a governor question.
    Check the large wires going into and out of K1, especially the ones leaving K1 and going to the lugs. Where the wires bend and go...
  • HoveringHMMWV
    HoveringHMMWV reacted to 87cr250r's post in the thread Replacement Bolts and Fasteners with Like Like.
    If you want fasteners that last you need to look for fasteners with inorganic zinc coatings often called zinc-aluminum flake. Trade...
  • K
    kloppk reacted to LuckeyD's post in the thread New to me MEP-803a with Like Like.
    Great! I recommend keeping loads under 50A per phase as the main gen is good for just over 100 AMPS total and you split it using 2...
  • L
    LuckeyD replied to the thread New to me MEP-803a.
    Great! I recommend keeping loads under 50A per phase as the main gen is good for just over 100 AMPS total and you split it using 2...
  • Bulldogger
    Bulldogger reacted to emmado22's post in the thread Replacement canvas or vinyl covers with Like Like.
    I understand, I do embroidery for my day job. "but it's only a few cents per thread" Yes, but its sewn out by a $50,000 machine on...
  • C
    czechsix reacted to emmado22's post in the thread Replacement canvas or vinyl covers with Like Like.
    I understand, I do embroidery for my day job. "but it's only a few cents per thread" Yes, but its sewn out by a $50,000 machine on...
Show older items
113,800members
166,895threads
2,349,928posts
1,032online users
Top