Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Latest activity

What's new

What's new New posts New profile posts Latest activity

BMI

Midwest Military Equipment

Eastern Surplus & Equipment Co

Members online

Total: 1,267 (members: 20, guests: 1,247)

Wreckclues reacted to Flyboy207's post in the thread M816/NHC250 Oil Filter Installation with Like.

Hello all, I apologize if this has been covered but I couldn’t find anything in the search bar, or in the TM’s for this. Today I was...

Monday at 5:41 PM
Scoobyshep replied to the thread Fried Volt Meter.

I call that one mans f*ck up is anothers cheap generator I have a 501 that seemed to be fine then randomly lost power. Found out that...

Monday at 4:57 PM
LCA078 replied to the thread M1097A2 w/4L80E transfer case capacity?.

I tossed a level on the trailer as requested. Trailer was slightly nose down but pretty level side to side. I even measured the hmmwv...
Monday at 4:39 PM
R

Ray70 reacted to Maestro's post in the thread MEP-803a with Start/Stop Lever Issue with Like.

I have a running Engine!! I got it reassembled enough to get it to run. After bleeding the lines, it fire right up after a couple...

Monday at 4:33 PM
R

Ray70 replied to the thread Fried Volt Meter.

I've purchased more than 1 machine that still had the shunt on the Hz. gage.... luckily way less hazardous there... but begs the...

Monday at 4:32 PM
R

Ray70 reacted to Scoobyshep's post in the thread Fried Volt Meter with Like.

Anytime Speaking from an actual observation, a 480v short not only is extremely exciting but a hazard to ones health and usually...

Monday at 4:29 PM
Mogman replied to the thread Fan stuck ON.

Not surer what you are calling he supply side. Without power it will allow flow back towards the return line to the pump from the clutch...

Monday at 4:14 PM
M

MikeCas reacted to Scoobyshep's post in the thread Fried Volt Meter with Like.

I feel like there should be a remove before flight type tag on it.

Monday at 4:08 PM
M

MikeCas reacted to Scoobyshep's post in the thread Fried Volt Meter with Like.

Anytime Speaking from an actual observation, a 480v short not only is extremely exciting but a hazard to ones health and usually...

Monday at 4:08 PM
M

MikeCas reacted to Guyfang's post in the thread Fried Volt Meter with Like.

You will never know how many people have done just that.

Monday at 4:08 PM
Mud Diver posted the thread After Market Fuel Tank? in M38, M38A1 and M170.

Has anyone run across a fuel tank on/for an M38A1 that has a baffle going passenger side to driver side in it? I was replacing the fuel...

Monday at 4:07 PM
G

grywitt replied to the thread Mep 831A load issues.

I still haven't done a legit load test so I'm hesitant to believe it's fixed. I've seen it do well for a minute before. Lol. The signs...

Monday at 4:06 PM
G

grywitt replied to the thread Mep 831A load issues.

Sorry no. We were sinking a 29 foot diameter shaft down 2140 feet and the crosshead was the device that hung between the cables and...

Monday at 4:03 PM
W

winterton1 posted the thread m151 trans in M151.

can anyone tell me how to remove the shifter from the trans so i can pull the engine..

Monday at 3:29 PM
J

jraney replied to the thread M809 Shutoff Valve, Primer Pump, Fuel Tank Supply Plate.

I can help you with all three of these. I will ony have the primer pump in good used the shutoff valve I will have in NOS.

Monday at 3:24 PM

Show older items