• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

SSGR14 Engine and Bed Swap

Rmtaunton

Well-known member
1,510
31
48
Location
Smyrna, ga
I have heard from a few people that are helping and what there bringing, ok only 3. Anyway if you are or want to be involved. Please get in touch so we know who is bringing/ doing what etc. Just need to have our ducks in a row so we dont leave home without somthing in the end.

Thank you

Robert



Andy3's truck is dead and sitting at 73M819's house.


www.steelsoldiers.com/showthread.php?128165-Deuce-was-dead-on-side-of-the-road

Recovry4x4 is swapping a truck bed with Speddmon.
 
Last edited by a moderator:

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,014
1,814
113
Location
GA Mountains
I will have normal hand tools and a complement of Milwaukee M12 and M18 cordless tools. I have a deuce clutch alignment tool for the endine swap. As far as the bed swap goes, I think Tom and I have everything for that. I also have a decent 12V compressor on board.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,196
314
0
Location
gainesville, ga.
What bed swap are we doing, I want to make sure I have the needed rigging.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,196
314
0
Location
gainesville, ga.
It would be nice to have someone narrate what is being done so others can learn
 

Coffey1

Well-known member
Steel Soldiers Supporter
3,871
493
83
Location
Gray Court SC
Robert there's also a complete tire swap.
I think a wrecker picking trucks up would be better than jacks if possible.

And I am bringing the engine oil for Andy's motor.
 

Rmtaunton

Well-known member
1,510
31
48
Location
Smyrna, ga
Robert there's also a complete tire swap.
I think a wrecker picking trucks up would be better than jacks if possible.

And I am bringing the engine oil for Andy's motor.
The wreckers are up to the guys that own them if all agree , I'll be there and turn wrenches with all , but has to be safe and everyone out of the way , but very doable .
 

Rmtaunton

Well-known member
1,510
31
48
Location
Smyrna, ga
Robert there's also a complete tire swap.
I think a wrecker picking trucks up would be better than jacks if possible.

And I am bringing the engine oil for Andy's motor.
And if you could I'll bring some 6x6 and if you can as well as nobody needs to be near a trucks ass or front end by cable alone , a little blocking and I say let's go for it
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,014
1,814
113
Location
GA Mountains
Ron, we are swapping beds between a contact maintenance truck and a cucv pickup. The contact bodies are peculiar to lift. Sped is bring 2 sling straps of sufficient length. Other than that, normal rigging stuff that we should have.
 

Bighurt

New member
2,347
46
0
Location
Minot, ND
I assume SSGR14 stands for Steel Soldier Georgia Rally 2014?

This whole thread is like a big loop, and I'm on the outside looking in...
 

swbradley1

Modertator
Staff member
Super Moderator
Steel Soldiers Supporter
14,191
1,539
113
Location
Dayton, OH
I assume SSGR14 stands for Steel Soldier Georgia Rally 2014?

This whole thread is like a big loop, and I'm on the outside looking in...

You are correct Jeremy. I changed the title so that it is consistent with the rest of the titles for the SSGR. ;-)
 

swbradley1

Modertator
Staff member
Super Moderator
Steel Soldiers Supporter
14,191
1,539
113
Location
Dayton, OH
Ron,

Nothing really special for rigging. I pulled one off one of 2002ford's truck a few weeks ago. We just used 27 foot ratchet straps and my backhoe.


20140713_165900.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks