• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What did you do to your deuce this week?

SMOKEWAGON66

New member
1,144
21
0
Location
California
Well, this weekend I began my preparations to sand-blast and prime the whole truck. I took the bed off and set it to the side to be blasted away from the truck so I can do the frame and axles/back of the cab un-hindered. Still have to remove all the lights, grilled, and cover the glass with steel tape. Im going to seal the cab from the inside as best I can and all openings in engine, trans, seals, breathers, etc. Im renting a 180CFM diesel screw compressor and an industrial blaster/ supplied air breather and I will be using medium grit coal slag...pics forthcoming :beer:
 

Attachments

bguy193

Member
174
3
18
Location
Farmersville,IL
Replaced a bad fuel tank, bad fuel pump, installed a new fuel sender while I had the tank off, and finished off with a new set of fuel filters. Now my wallet is gasping for air. I hope for a good recovery.
 

steelandcanvas

Well-known member
6,187
85
48
Location
Southwestern Idaho
I tinkered around all week after work on the Deuce. I installed an interior armor light in the cab, and re-installed the gauge panel for my boost and pyro. The boost gauge was operational for the event this weekend, but the pyro was not. Installing the pyro pre-turbo is a little more work than a post-turbo installation. This week I'm going to see what my toe-in/out is, front tires are cupping on the outsides. My wallet isn't so bad, I've had these items either previously installed or on the shelf.
 

Attachments

Last edited:

Rubenk

New member
57
0
0
Location
NW AR
Ordered all of the filters and hope to do my first oil change when I get to my truck in a few days. As well as new headlight so i'm not running around like a pirate.
 

islandguydon

Well-known member
Steel Soldiers Supporter
3,724
783
113
Location
Michigan
Replaced the air cleaner and installed a solargizer, I silicon-ed it to the top of the hard top passenger rear corner and ran the wires down the back of the cab to the battery box, I secured the wires wrapped in the black flexi stuff to the existing 109 box wires with tie straps.
 

wrath243

New member
2
0
0
Location
Plentywood, MT
I am new to this site but it has helped immensely with the learning curve on my m35a2. I just completed a 1700 mile trip with everything I own in the back of the deuce. It was a long trip but the beast ran great!
 
Top