Hooper
New member
- 294
- 0
- 0
- Location
- Grand Rapids
Has anyone found a NAPA seal that will work for the pinion seal? I'm going to need 12 of them at some point. And of those who replaced them was it successful or did it still leak?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Is there a NAPA pinion seal....
- Thread starter Hooper
- Start date
- 7,744
- 155
- 63
- Location
- Columbus Georgia
I am just throwing this out as I do not know the part # - but the seals should have a mfg # on them - these numbers can be converted also to other mfg's.
Only way I see a pinion seal still leaking is if its not installed correctly - or the output shaft has a groove in it - speedy sleeves can temp repair the grooving.
Only way I see a pinion seal still leaking is if its not installed correctly - or the output shaft has a groove in it - speedy sleeves can temp repair the grooving.
- 1,918
- 19
- 38
- Location
- Bradenton, FL
I recently got a bunch from Clark Truck Parts in WV. Fair pricing and they "Work"!
Hooper
New member
- 294
- 0
- 0
- Location
- Grand Rapids
If no one had a NAPA number I was going to buy one and look into it. My guess is many of these trucks have grooves on the output shaft. Of the twelve possible seals leaking I need to replace 6 of them. One is really bad and the truck only has 500 miles on since it's pmp.
Hooper
New member
- 294
- 0
- 0
- Location
- Grand Rapids
Sweet, how much were they each if I may ask?
- 26,246
- 1,187
- 113
- Location
- NY
If this is the correct NSN, hers the info you need. http://www.parttarget.com/5330-01-023-0269_5330010230269_543159-38.html
Hooper
New member
- 294
- 0
- 0
- Location
- Grand Rapids
Hey, that's a good idea.
Hooper
New member
- 294
- 0
- 0
- Location
- Grand Rapids
Eriks has them for 15.00 NAPA could not cross the number. I like Eriks, I'll just get them for him. His prices are the best I've seen.
Hooper
New member
- 294
- 0
- 0
- Location
- Grand Rapids
Alright then. Once I get the seals from Eriks I will attempt to find it from a auto parts store and report back.
porkysplace
Well-known member
- 9,604
- 1,494
- 113
- Location
- mid- michigan
Zakkoff Seal and Packings , will have any seal you need .
Grand Rapids Branch
4678 50th Street S.E.
Grand Rapids, MI 49512-5401
(616) 698-6880
FAX: (616) 698-6877
Grand Rapids Branch
4678 50th Street S.E.
Grand Rapids, MI 49512-5401
(616) 698-6880
FAX: (616) 698-6877
- 5,686
- 3,076
- 113
- Location
- Metairie/La (N'awlins)
You might want to check my thread on the 5 ton for my experience with the pinion seal and very poor tm. DO NOT USE A GEAR PULLER! Totally unnecessary! I could never find the seal aftermarket. I ended up on epay with a seller selling 2 at a time very reasonable. No sure on the front as I worked on rears axles but the forward and rear facing seals are the same part.