I trained in automotive mechanics for a few years, and know that every car ever made has a wiring schematic and flow chart for any problem that arises with said car. I was wondering if there are any for the MV community. I have a "operator's manual", but that is very different than the a fore mentioned.Thanks for the info, and have a good one!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Are there any wiring, or flow sheets?
- Thread starter tbar123
- Start date
- 26,246
- 1,187
- 113
- Location
- NY
Yes there are.
Which truck?
In general terms, the TM ending in -10 is the basic operators manual.
The TM ending with -20(or 20 something) is the Unit level maintenance manual. It covers work and troubleshooting that you might do in your own garage.
The TM ending with -34(or 30 something) is the Depot level maintenance manual. It covers things you might normally take a vehicle to the dealer for.
The TMs are available here on the site for free. Download them, and save them. Then use them.
Which truck?
In general terms, the TM ending in -10 is the basic operators manual.
The TM ending with -20(or 20 something) is the Unit level maintenance manual. It covers work and troubleshooting that you might do in your own garage.
The TM ending with -34(or 30 something) is the Depot level maintenance manual. It covers things you might normally take a vehicle to the dealer for.
The TMs are available here on the site for free. Download them, and save them. Then use them.
- 2,186
- 87
- 48
- Location
- Zimmerman MN
But who is my supervisor when I run the course of troubleshooting?
- 34,010
- 1,823
- 113
- Location
- GA Mountains
Going to have to adapt for that.