• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

CUCV Torque Spec Cheat Sheat M1008 M1009 M1010 M1028 M1031

Al Harvey

Active member
1,153
16
38
Location
Dover, TN
Here is another Torque sheet I created from the TMs. Once again the page number is on there where I got it from, though some of the page numbers in the TM seem to have typos but I tried to number them by what they should be. I got a bit bored dealing with this case of Shingles so I've been creating things like this. lol Hopefully it will help someone.

View attachment CUCV Torque.pdf
 
Last edited:

lostnbfe

Member
51
0
6
Location
Decatur, AL
Man this is awesome!! Hope you get to feeling better soon. I went by and saw David at the hospital last night. He seems to be doing a lot better. Hopefully he will be out today. Hope you and your family have a Safe Happy Thanksgiving Robert.
 

M1008BOV

Member
125
0
16
Location
IN
Nice work! Maybe put the inch lb ones in red tho. We don't need anyone tightening their trans pan bolts down to 160 ft lbs rofl
 

MarcusOReallyus

Well-known member
4,524
808
113
Location
Virginia
Nice work! Maybe put the inch lb ones in red tho. We don't need anyone tightening their trans pan bolts down to 160 ft lbs rofl


Ah, that's no problem. They'll never get them that tight anyway. They'll shear off a long time before that!


:mrgreen:



Al, nice work, and thank you! :beer:


BTW, try some coconut oil on those shingles. It's pretty amazing stuff. I haven't tried it on shingles, but based on what I've seen it do for every other skin problem, from bad burns to terrible eczema, I bet it would help.

Make sure you get the organic kind. Any health food store will have it. We get ours from Costco, since they started carrying a good quality brand. Used to get it from www.tropicaltraditions.com

Excellent quality, and great service, but it's a lot cheaper at Costco.
 
Last edited:

donalloy1

New member
673
1
0
Location
Martinez Ca
Great work Sir! This document will come in very handy. Time to get out torque wrenches and go front to back.
 
Last edited:

Al Harvey

Active member
1,153
16
38
Location
Dover, TN
Gripy,
I've always applied 100 foot pounds on passenger vehicle wheels. So far I haven't ever had a torqued wheel come off. Knock on wood.
 

Lebowski

Member
54
3
8
Location
Manitoba Canada
Great info! I was expected only one sheet, and when printed got 5 sheets that cover basically the entire truck! THANKS!!:D

Hmmm...might be worth laminating and keeping these in the garage for oil impervious smudge proof reference.
 

Jake59

Active member
167
94
28
Location
Kaggevinne, Flanders, belgium
Hi Al,

Not sure if you're still bored 8) but could a column with corresponding Nm torque values be added to your Torque Spec Sheet?
Or otherwise you can send me the Excel and I'll do it and send back to you.

Much appreciated,

Jake
 

Al Harvey

Active member
1,153
16
38
Location
Dover, TN
Not sure if you're still bored 8) but could a column with corresponding Nm torque values be added to your Torque Spec Sheet?
Here is one with the Nm added in a new column. Please check this and make sure the figures are correct. I used a formula of Nm = Ft lbs / 0.73756 for all the foot pound conversions. For the inch pounds, I went and pulled the numbers out of the manual just to make sure I didn't do any math wrong.

View attachment CUCV Torque with Nm.pdf
 

Sharecropper

Well-known member
Steel Soldiers Supporter
1,814
942
113
Location
Paris KY
Here is one with the Nm added in a new column. Please check this and make sure the figures are correct. I used a formula of Nm = Ft lbs / 0.73756 for all the foot pound conversions. For the inch pounds, I went and pulled the numbers out of the manual just to make sure I didn't do any math wrong.

View attachment 749170
I wish I had the original Excel file so I could arrange them alphabetically.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks