• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

MWM diesel?

BKubu

Well-known member
Steel Soldiers Supporter
4,720
1,081
113
Location
Gaithersburg, MD
Oooops, I got a warning for sending you the ebay listing. Can't send active auction listings.

Well, it's the guy who has the transmission controller listed. I'm deep into trying to find manuals
and from them there could be cross listings for parts...depends on what manuals, if any, I can locate.
FWIW, I Googled 2330-01-531-2701 and that is the NSN, National Stock Number. Tons of info just
from that search.
Larry
You may have gotten a warning for posting auction information on the site, but there is nothing stopping you from letting someone know via PM about that information.
 

glengar

New member
16
0
1
Location
Glyndon,MD 21071
HI!
This is Tim CLARK in Maryland
I have two GROWLERS--one to drive and one for parts
Please send me whatever manuals you have for this vehicle
I'm at PO Box 126 in Glyndon,MD 21071
I'll reimburse you for the CD and postage
My Tel# is 410/833-4442
THANKS !
HI!
This is Tim CLARK in Maryland
I have two GROWLERS--one to drive and one for parts
Please send me whatever manuals you have for this vehicle.
I'm at POBox 126 in Glyndon,MD 21071
My Tel# is 410/833-4442
I'll reimburse you for the CD and postage
THANKS!
 

YJSteve

Member
31
4
8
Location
USA. Md.
Has anyone bought any of the MWM 2.8 liter diesel engines from GP? The engine fits the M1161 air transportable Growler from the Marines. I bought one about 2 months ago. It looked new, still in the crate wrapped in plastic and such. Well I am having quite the time finding the parts for this engine and am wondering if anyone else has a lead as to where to go to get parts for this thing. I went directly to Growler manufacturing directly, both a phone call and email... NO RESPONSE. I went to a Navistar dealer and the had never heard of MWM, funny cuz Navistar bought MWM back in 2006. Anyways I finally contacted MWM Brazil and they directed me to to the only authorized MWM dealer in North America out in Ohio called Hercules manufacturing. I need a starter and a flywheel and a computer, I was quoted a price for a stater of 617 bucks and that does not include shipping from Brazil. The flywheel is 428 bucks and also does not include shipping from Brazil. Unable to get a computer. I know that the flexplate fits a 4L60 transmission but would a turbo 350 bell housing have the same bolt pattern. Any help would be nice!
I bought one last year around the time of this post, I'm putting it in my 93YJ with a 700r4 transmission so I dont have to use a computer, Im told this motor will run without a computer. I see you talking about a flex plate. What are you referring too. Also I purchased a 3 bolt starter that i thought was going to work but now im not so sure. Any info you could share would help alot. Im in Md. Could send you my email or phone number. Would also like the manuals.
 

YJSteve

Member
31
4
8
Location
USA. Md.
Has anyone bought any of the MWM 2.8 liter diesel engines from GP? The engine fits the M1161 air transportable Growler from the Marines. I bought one about 2 months ago. It looked new, still in the crate wrapped in plastic and such. Well I am having quite the time finding the parts for this engine and am wondering if anyone else has a lead as to where to go to get parts for this thing. I went directly to Growler manufacturing directly, both a phone call and email... NO RESPONSE. I went to a Navistar dealer and the had never heard of MWM, funny cuz Navistar bought MWM back in 2006. Anyways I finally contacted MWM Brazil and they directed me to to the only authorized MWM dealer in North America out in Ohio called Hercules manufacturing. I need a starter and a flywheel and a computer, I was quoted a price for a stater of 617 bucks and that does not include shipping from Brazil. The flywheel is 428 bucks and also does not include shipping from Brazil. Unable to get a computer. I know that the flexplate fits a 4L60 transmission but would a turbo 350 bell housing have the same bolt pattern. Any help would be nice!
I purchased one around the we of this thread.
Putting in my 93 YJ with 700r4 transmission. That way no computer, im told this engine will run with no computer. Any info you could share would be great. I purchased a 3 bolt starter now after reading this thead it may be wrong. I need a flywheel also wont a chevy flywheel bolt on? What is this flex plate you've spoke of. Any manuals woul be a big help. Any info at all. Im in Md. Could maybe send my email. Thanks Stephen
 

YJSteve

Member
31
4
8
Location
USA. Md.
So the starter I got from Hercules was not for this engine... It doesn't fit and is too long, the snout doesn't fit the plate for the mounting...so I'm back to square one... anyone want to buy a crated MWM with a flywheel $3500 you pick up unless u want me to haul it to you.
You still give up on this engine? Call me 4437903397
 

YJSteve

Member
31
4
8
Location
USA. Md.
HI!
This is Tim CLARK in Maryland
I have two GROWLERS--one to drive and one for parts
Please send me whatever manuals you have for this vehicle
I'm at PO Box 126 in Glyndon,MD 21071
I'll reimburse you for the CD and postage
My Tel# is 410/833-4442
THANKS !
Hey Tim I'm in Linthicum Maryland, I purchased a MWM 2.8 to put in my jeep I would love to see your growler under the hood. I need to figure out alot of stuff. .
 

IMP

Member
45
10
8
Location
Fruitland Idaho
Congratulations on your accomplishments. Could you give me a lead on how to get that starter? I'm searching for months now trying to buy one and hitting one stone wall after another. I even managed to get the MWM part number ( 9.0572.01.0.0097) but nobody has been able to cross reference it! Any info on that starter would be appreciated.

My second M1161 was purchased for parts but turns out not to have not been used at all! The starter had been damaged by a stuck relay that kept the start pulse on the solenoid due to welded contacts in the slave relay!! No wear on any of the pedals or other parts! But finding that starter has been, as you know, a hassle.

Thanks,
Larry
Have you found your starter Yet ?
 

IMP

Member
45
10
8
Location
Fruitland Idaho
Lees alternator, it is a OSGR 24 volt 4.5kw 11 Teeth cw Toyota lift truck . Prestolite 7705 Military with Drive SDND-2057 & housing change is how the Invoice reads. The starter on the Growler was burnt up and this just bolted on.
 

YJSteve

Member
31
4
8
Location
USA. Md.
Lees alternator, it is a OSGR 24 volt 4.5kw 11 Teeth cw Toyota lift truck . Prestolite 7705 Military with Drive SDND-2057 & housing change is how the Invoice reads. The starter on the Growler was burnt up and this just bolted on.
You meant Lees starter correct. So you found one that bolted right on and worked with no shims/ adapters? Also Im looking for a flex plate adapter, Im using a chevy auto trans like the growler did. I don't wanna give up on this engine.... I also need an alternator, belt and tensioner set up for this MWM 2.8, Thats all I think I'm running on the front of the engine. All help is appreciated. In the end I shall have a 93yj jeep with no computers, 513gears 4speed auto trans with Atlas transfer case.
 

fuzzpuss

Member
71
2
8
Location
Pahrump,NV
I see an auction at GP for some growler parts and I see a starter in the parts. Its in Albany Georgia and its for July 01 and its starting bid is $200.

If anyone has a starter they could part with for less than 400 bucks that would be great.... unless they are going to bid on this auction and don't need the starter fro this sale.

It is listed as "Assorted ITV Parts"
 

YJSteve

Member
31
4
8
Location
USA. Md.
OK but your not going to like it... I contacted a company in Ohio called Hercules manufacturing... turns out that they are the only ones who import for MWM Brazil in the entire U.S. Don't expect anything but heartache while contacting these folks. The owner was who I had contact with the whole time and the guy acts like you are an inconvenience and not a customer I was directed to the owner from the other employees at Hercules BTW. I did get my parts, but only after I sent an email to MWM Brazil after months of basically getting the run around from owner of Hercules and they got all over his ass about it. If I could have gotten the parts directly from MWM I would have. I would text the guy directly and 3 weeks later text him again just to keep on him, and 99% of the time he wouldn't even be courteous enough to give a quick reply back on the status of the order. I hate to recommend these guys but unless someone can cross reference the numbers to a generic starter from autozone or something your screwed. I will open the crate and pull out the starter and get the starter part # for you here in a little bit... hour away. Even though Navistar owns MWM I went to a Navistar (International) dealer in Vegas and the guy working there claimed to have worked there for 26 years and knew nothing of MWM or that Navistar owned them, he even aked the main guy there and he knew nothing of the merger or of MWM, that and they acted like pompous asses anyway.

SO... The growler and its parts system sucks! I played stupid and texted the owner back a couple of weeks ago and said I had a friend who needed a flexplate... he claimed he checked with MWM and the don't make a flywheel... I asked about a flexplate and he tells me they don't make a flywheel... I ALREADY HAVE A FLYWHEEL, I need a flexplate so I doubt the guy ever checked with MWM he just said that so I wouldn't both him anymore.
Yeah I've been getting the same run around from the guy Doug at Hercules... Asshole
 

m1161

Member
54
31
18
Location
Hackettstown NJ
Yeah I've been getting the same run around from the guy Doug at Hercules... Asshole
I have that starter, new in the box. And yes it cost me about 600+ to get it from Brazil and a long time to get it.
The bad news, it is not for the M1161. It is 12 volts and has a 13 teeth gear. It did not mount on the M1161
adapter plate. So, yes, it's yours for a steep discount if you'd like. Send me your e-mail and I'll send you a pix
as I don't know how to send pix on this forum machine.
larry
 

YJSteve

Member
31
4
8
Location
USA. Md.
I have that starter, new in the box. And yes it cost me about 600+ to get it from Brazil and a long time to get it.
The bad news, it is not for the M1161. It is 12 volts and has a 13 teeth gear. It did not mount on the M1161
adapter plate. So, yes, it's yours for a steep discount if you'd like. Send me your e-mail and I'll send you a pix
as I don't know how to send pix on this forum machine.
larry
I have the large adapter plate for the chevy transmission. The same one used on yhe Growler.
Are you refering to this adapter plate, or the little one they used on the starter to make it a 2 bolt hole mount.
stephenevans89@gmail.com
 

fuzzpuss

Member
71
2
8
Location
Pahrump,NV
SO, Has anyone figured out which starter fits this engine yet?? I mean a U.S. available one that fits that military plate on the engine. DB electrical says they have one but the holes on the starter flange are on the opposite side.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks