• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Rhino Tire Carrier - Washer Specs

HmmwvTim

HmmwvTim

Active member
Gamble said:
I've got every one of those washers except the black one. That's the one I need.
Click to expand...
Seems to be the case for most people parting together one of these. Now you know the dimensions. Would be nice if someone started to make these and sell them.
 
A

Action

Well-known member
HmmwvTim said:
Dont have the skew but it is in the grade 8 thick washer box. It will be hard to miss. As for the black one, that might have to be special ordered or custom made. I would just get a qtr inch plate and ask a machine shop to cut 2 to 2.25” outside diameter and a half inch inside diameter circle with a cnc. Might be cheap.
Click to expand...
Might be cheap or might be an hour minimum labor.
 
TNDRIVER

TNDRIVER

Well-known member
Steel Soldiers Supporter
HmmwvTim said:
got it on. Took some photos. The little mxc washer is the spacer I used so I can keep the mudflaps on the outside. It is slightly thinner than the mudflap but there is a patrusion on the bumper and the mud flaps compensates for this with a slightly hollowed out section behind the metal. That washer is 80 cents at ace hardware. The bolt that mounts the post could be a qtr to a half inch longer. I might get me a longer one. Hope this helps.
View attachment 867434View attachment 867435View attachment 867436View attachment 867437View attachment 867438View attachment 867439
Click to expand...
My two cents for what it's worth, Tractor Supply where I live sales a "shim" in the same size as the large brass washers. Cad plated I think, stocked with the 3 point hitch goodies,they work for me.
 
Gamble

Gamble

Well-known member
lpcoating said:
What size do you want? HRS for material good enough?
Click to expand...
I think that HRS (High ?? Steel) is good enough. I need the size of the black washer. It appears to be 2inch outer diameter, 1/2 inch inner diameter, and 1/4 inch thickness.
 
You must log in or register to reply here.
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks