• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Black Rhino Wheels

JKDAY

New member
25
14
3
Location
St Louis MO
I used to run the stock military tires and wheels with runflats and I would always get a bad vibration right around 70mph. I tried centramatics and even balancing the old wheels on a dynamic balancer, but I could never get the vibration to stop. No vibration with the new setup at 70mph. It runs very smooth. There aren't any exterior weights on the new wheels, so they probably did use ceramic beads or something similar to balance the wheels internally. I can't hear anything bouncing around in the new wheels, but there has to be something inside. I know I had steel shot or something similar in two of the old military wheels because I could hear the shot bouncing around when I would roll the wheels on the garage floor.
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
5,808
8,067
113
Location
Papalote, TX
Do you remember the part number you ordered?
And it went right on the hub with no changes?
They have a listing for H1, don't remember the part #, they bolt right up, I have them on both of my HMMWVs
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks