jimm1009
Well-known member
- 1,165
- 71
- 48
- Location
- Louisville, KY
I did some research on the M105A1 trailer and the A2 parts are listed but not the A1.
I am going to go through my hubs and brakes in a couple of weeks on my M105A1.
I do have the TM but was wondering if any one has a NAPA or Timken part number for the bearings, outer races, and the hub seals?
If I need to rebuild the wheel cylinders I may need seal kits too unless they are too bad like my deuce was where I just installed 6 new cylinders.
If anyone has a cross reference for these i would appreciate the intel.
Also if anyone had really good luck with a supplier I would appreciate a PM or e-mail. jimm1009 here on S.S. or e-mail: jimm1009@yahoo.com
TM p/n 10948079 O.B. bearing & cup set.
10945151 I.B. bearing & cup set
10896684 hub seal
7521650 locking washer for wheel bearing retaining nuts
jimm1009
I am going to go through my hubs and brakes in a couple of weeks on my M105A1.
I do have the TM but was wondering if any one has a NAPA or Timken part number for the bearings, outer races, and the hub seals?
If I need to rebuild the wheel cylinders I may need seal kits too unless they are too bad like my deuce was where I just installed 6 new cylinders.
If anyone has a cross reference for these i would appreciate the intel.
Also if anyone had really good luck with a supplier I would appreciate a PM or e-mail. jimm1009 here on S.S. or e-mail: jimm1009@yahoo.com
TM p/n 10948079 O.B. bearing & cup set.
10945151 I.B. bearing & cup set
10896684 hub seal
7521650 locking washer for wheel bearing retaining nuts
jimm1009