Recent content by Amnon

Went out to run my spare 004A and it took a good 30 seconds to start and get to normal RPM. I then noticed that the voltage was at 120V, but nothing on the frequency meter. Shut it down to try again, but it took it about two minutes to actually shut down. It kept on running a a very low RPM...

I got a rebuilt steering column and box for my 53 M38A1 locally. Is there a trick to removing and replacing it on the Jeep without taking half the engine out? :-) Amnon

Just spent a few hours looking through the TMs you posted, and by the way THANK you for that great job, and could not find the info. Maybe I blinked?? :-) When you have a minute, could you please let me know which TM? As far as voltage, the rectifier does have 24V on one leg (the one leg that...

(four years forward :-) Having a problem with a 004A that was not used in about 5 years. Found out the injection pump was the problem, so got a rebuilt one. The generator started (fresh fuel too) and ran for about an hour. Then the RPM started to go up and down a little (heard it and saw the...

Was the lower hose NEW or NOS? After replacing the injection pump on the Deuce yesterday, right before putting the radiator back on, I noticed the lower hose which I replaced a couple of years ago was cracked to the point that I just can't trust it. It was one that I got on eBay from one of...

How tall is the post, and what diameter? (if you don't mind :-)

Thanks. I am going to take a look at the return lines between the injectors first.

For the last few times, when I start the CUCV after it sits for a few weeks (it is not a daily driver), it will start right up, but after about 30 seconds, the rpm will go up a little and then the engine will cut off. Restarting it will take maybe 5 to 10 seconds of starter work, and then...

Please let us all know if you do. Delk's surplus in NC buys a lot of them and I was told they rewire them for 120/240 before selling them for around $5500. I am going to give them a call and see if someone there could help. I got mine about a month ago. Oh yeah, anyone knows what the AAS...

This is a posting for a friend, please don't reply to me. ------------------------------------ Amnon, Do you know anyone that would like to buy my Army Truck. I no longer have a use for it. It is located at my shop in downtown Raleigh if anyone wants to see it. It needs some work, but would be a...