Recent content by Augdog1964

  1. Augdog1964

    Buying a BRDM 2

    Honestly, I've never moved anything that light... so I don't know exactly. Of course, it depends on the country, try to avoid moving through Germany to a German port at all costs. They have NO sense of humor for armored vehicles. They almost seized my T-72M1 as it was waiting on the ship, and...
  2. Augdog1964

    Buying a BRDM 2

    DO NOT BUY from Russian Military Trucks in the UK... he swindled me out of $50k and two vehicles. Mortar Investments ok, been there to see them. Its more a hobby business for them though... STV group is good to go, bought my T-72M1 from them. If you can find one personally owned in the UK...
  3. Augdog1964

    Mile Marker Winch Brackets

    Will it mount on an A2 front plate with extensions? If so it should run right through the bumper. Not sure though, as the A2 plate is made for the Warn... you will need extensions.
  4. Augdog1964

    Pintle extension using A2 Airlift reinforcement plate or not?

    Thank you, yes sir....
  5. Augdog1964

    Pintle extension using A2 Airlift reinforcement plate or not?

    Wondering if the Pintle Extension for the A2 bumper is required or supposed to have the A2 bumper reinforcement plate installed as well? The TMs aren't horribly clear with the diagrams... Thanks in advance!
  6. Augdog1964

    Milemarker hydraulic winch with ECV nose

    Hey all, I have a like new Milemarker hydraulic HMMWV winch with winchplate... however i'd like to do an ECV nose conversion to my M1123 before I mount the winch and ibis tek... SO that would require a special winch plate, and I'd guess custom hyd lines for the extra distance... Anybody...
  7. Augdog1964

    Source for 1/4 x 20 X-Door bolts - longer OAL, torx head?

    12 point screws... that did it... not categorized as e torx... Thanks so much! I'll just have to cut more threads as they were only threaded for 1 inch...
  8. Augdog1964

    Source for 1/4 x 20 X-Door bolts - longer OAL, torx head?

    Tried there, didn't see
  9. Augdog1964

    Source for 1/4 x 20 X-Door bolts - longer OAL, torx head?

    I went there before I posted... and only found internal torx pan head... no external torx... which is the male end...
  10. Augdog1964

    Source for 1/4 x 20 X-Door bolts - longer OAL, torx head?

    Hey guys, I have an M1123 and I had to drill out the nutserts, and put new in... as they had cut the original bolts off flush... no way to get them out. SO, since I put new nutserts in I want to reinforce the top hinge of the Supplemental Armor XDoors hinge... which will tie into the MAK armor...
  11. Augdog1964

    XDoors on M1123 that had MAK armor?

    Thanks guys...
  12. Augdog1964

    ID on turret hatch

    sorry I thought it had attached, I guess I clicked off before it made it...
  13. Augdog1964

    ID on turret hatch

    Hey guys, My expertise is traced armor... so I'm learning here... What type of hatch is this? It was sold to me with an HMMWV slantback kit... but online searches don't see to bring this type of for HMMWV installations. Thanks in advance...
  14. Augdog1964

    XDoors on M1123 that had MAK armor?

    Well, I took a couple of drills, a mini sledge, and a big punch and went at them yesterday. I started with a pilot hole as centered as I could manage. Then a large bit about the same size as the rivnut head... Then smacking them with a punch and sledge until they let go... then fished them out...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks