Recent content by bigflew

That is the way the army received the 3116 motors . There is a filter in between the pump and the injectors.

The pre filter is the yellow filter in the pic. The military had it bypassed but the housing was still.there so I basically just re plumbed it back into the system

My m35A3 quit 1 year ago what I found was a feul tank check valve plugged. Easy enough to clean. But also replaced fuel and return lines . It ran good all last summer. It started and ran good when I got it out this spring.... once. Then would not start. Here is the repair in short. I...

Yes drew it out fabricated the frame bought a sewing machine and some good fabric

It's been a long time since I've posted anything but here is my latest project, it took about 3 weeks .

the way I read it the bill includes a MV for unrestricted use in August the same as a historic plate, For purposes of this section, use of the vehicle during the month of August in each year is considered an exhibition. Use in August is considered an exhibition. an MV can be...

Made and installed front mount reciver for winch (movable front or rear)

No

I have new in box A 3 controllers for $75 plus shiping $10

Still in prototype but seems to work well at all speeds, and trail conditions. Cost to me so far has been less than $500. Compared to $6000 plus for real slant back.

CONFIG]648172[/ATTACH] Just finished my faux slant back prototype,all military canvas ,removable

Agreed for an 30 year old truck they do great I love mine and use them as much or more than most, but the electrical system is the weak point . most of wich runs through One fuse!!!

All I have to say is you better get used to smoke coming from under the hood of your cucv.

That is a lot of information, Good information, Although the towing I do wont be fast or long distance I believe you are correct stick with the 400 and if I need more power then repower. HMM I do have a couple big blocks laying around...

This started as needing a transmission for my 1009 i was going to sreel the one frm the 1031 then put in a 700 in its place. With all the mods and the fact i will be towing heavy boats im not sure the 700is worth the trouble or as durable.