Recent content by bo911miller

The attachment of the top post of the snorkel is what I was wondering about ( see picture) thanks

Do you have any pictures on how you attached the top mast? Did you attach the snorkel to the windshield frame or the door jamb

Ord crossover steering will not work with sway bar disconnect kit. I usually ditch the sway bar all together, in my own opinion there is not much difference in handling without it.

Below Tyler. Where is the best to get a new injection pump?

I have removed the pink wire on the ip and you can hear it atcuating when the engine is cold . I have also pulled the pink wire after the engine died, when it was warm and you could hear solnoind working then. I am at a loss. Please help.

My m1010 started running rough a few weeks ago at the deer lease. It started white smoking then died like the key was turned off. I figured it was the fuel filter so I changed it to no avail. The truck would run untill it warmed up and then die each time with white smoke . If you let the truck...

I found that in my late night searches for ideas for my m1010. That is all the pictures I could find of that truck.

http://www.v-8.fr/chevrolet_----/04764.html

Looks like it has been done before.

I have thought about something like that but it would limit the passenger door on the rear of the ambulance from opening all of the way.

Has anyone ever fabbed a spare tire mount for the rear doors on a m1010? Would the stock door hinges support the weight of a 37 inch tire and wheel? I am hesitant to mount a spare on the roof . I do not want to make it any more top heavy than it is

How would you wire this? Would this be with the duvac intact?

So I took the cover off the Ac and the first thing I found was a 24 v resitor blown. Where should I start looking for one of those? Would this cause the fuse to blow?