Recent content by crazymechanic

thanks keith Well I have new reg and stator on way Il let you know results .

Thanks keith that helps Big time , I never messed with the upper wires on the block im so pissed this was always screwed up I only disconected the stator wires assuning everything else was good my wires are all wrong ,IM curious wether the mag is now bad as well possible demag from current ...

well I think my reg wires are wrong all along this is what fried every thing somebody was working on this before me !

wiring Hi Im having same problem , I installed new stator same low a/c coming out of the 2 wires , changed magnet Baboom over 40 volts A/C , then connected regulator and melt down in the stator (fried it ) your wiring on the reg is different then mine look at picture , either I have a bad reg...

hey out there anyone there ??I thought i had a voltage problem charging Batteries turns out its works watching it for a while it goes up and back down till batteries are charges 25.5 - 29.9 , when I first start it shoots up to 32 volts then comes back down and settles woohoo works for me , I...

stator also my other smaller GEN MEP 016B has intermitten voltage to battery as well charges when i first start it gos up to 26.9 then let it run a while and voltage is back down to 24.4 is this the voltage reg as well any one have this ? I cant beleive I got 2 gens with charging problems no...

these are a bolted in part and you can tell they have been replaced before there housing is brown primer probly for a 12 volt system who knows , magnets can go bad from a simple wack with a hammer towards the south pole , il see if i can post a picture

Yes with Reg disconected and with motor at 60 hz and with multiple high rpm settings

were can i get a used or new magnet set ???

I have this old gen I bought like 15 years ago it was in my parents basement I forgot I even had it it did run back then , but I dont need another project any offers ?

generator well I put a new stator in it and still 27 volts A/C should be 30-35 a/c , the magnets I think feel week .

wow just read this whole thread ... same problem I wont be disconecting the batteries while running how do you make the flyback ?A flyback diode on the governor solenoid will snub the back electromotive force, saving the oil pressure switch and thermal cutout.

great, thanks keith Il check it out whe it stops raining I still need a stator because it didnt check out it was putting out 3 volts a/c

this wire in the pic has 24 volts all the time dosnt matter if switch is on or not seems wrong ,I dont no if this is correct ?

Hi thanks for all the advise guys, the 3 kw is working now puitting out 120volts so far Iv been taking aprt the mep002 and it turns out the stator is bad I need a new one any one have a used one on here ???