Recent content by dma251

The TMs have the answers to most of your questions.

To get the o-ring to stay in place on the rim during assembly I used a little 3M Super 77 spray adhesive. Worked great.

I have the Federal Military Parts doors, and they seem like a well designed and high-quality door, but they are not exactly a stock replica. They are made from steel, and the “X” is a piece of heavy steel plate cut out to stiffen and give a similar look to the x-doors, but if you are restoring...

I'm looking for the vertical VIC3 mounting bracket that goes on the turbo radio rack in place of the lower shelf. Anyone have a PN or know where I can find one? I can't find one on Ebay without buying the whole rack.

I was and now I’m not.

Thank you! It's nice that it's up here now for the next guy who snaps one off with his new DeWalt cordless impact! Those suckers are very powerful!

I broke one of my rim studs on a 24 bolt wheel and recall finding it once in a TM, and now I can’t find it anywhere. Found the 12 bolt studs, but not the 24 ECV version. I never ask for PNs without first making the attempt myself, but I’m coming up empty. thanks!

Looking good! I'm working my way down my own rabbit hole with a Govplanet M1165A1. Also nice work not letting the sometimes cliquish culture of these boards discourage you from posting about your project. Most on here are just regular folks who want to help others. Where in Washington are...

I've given up trying to get these 24 bolt wheels and tires mounted and holding air. I've got a PVC (Wigsplitter/Trailworthy) insert in one, and the standard Hutchinson runflat in the other, and I can't get either to seal up and hold air. Believe it or not, I mounted all 9 of my HEMTT wheels...

Anyone know where the Pulsetech power distribution box was mounted in the HMMWVs?

So the answer for anyone else is to just pry really hard with a little mini-prybar to pop them out of the nylon bushings that are snapped into the wiper linkage. Really Really hard.....

I'm struggling to "un-snap" the linkage arm nylon socket from the pivot inside the channel in the windshield. What's the way to go?

I found them sold in a big lot at GP. I wish some would show up on eBay so I can get a set myself.

Thanks for the advice - To avoid turning a minor project into a major project, I will just find a Sheppard box.

I have an M1165A1 (I think it's a 2007) serial number 249812. Of course when I got it was missing some important parts, one of them being the steering box. I am aware that around this point the REV models got the Sheppard steering box, but I'm not sure if mine got that or not. Does...