Recent content by Frost0071

That's what mine looks like at the moment. I still need to clean the welds a little bit better

Is CTIS really that bad? I already have the parts beside of the internals from the hub's. I also have a compressor setup installed just not completely wired up.

I also checked the manual and saw the different numbers but I'm not 100% sure. This is why I would like to know the diameter of the old spindle. I'm sourcing the parts at the moment to add CTIS to my 87 M1038 and I would like to have everything here before I rebuild my hubs.

Does somebody know if there is a size difference between CTIS and non CTIS lower gears in the hub? I have the new spindles already but I don't know if I can use my old gears. This is the size of the new CTIS spindle. Does somebody have a normal spindle laying around and could measure it for me...

Let me know what you want to see and I will make you a picture. I would say the roof is OEM. The way how it is build and how it looks seems to be original. My HMMWV was never a slant back so I completely build it by myself and bought me all the hardware new. I also welded the dodgers on my...

I have one on my M1038 and build me a custom inner structure I bought it from www.secoparts.net

FYI I used a 11x3mm O-ring and it worked fine

Does anybody knows the size of the O-ring for the 12 bolt wheel valve? I was looking for it but I can not find the dimensions anywhere. Thanks

I used the weld one ones from Kaskar they work fine but it was a pain to get them aligned. And yes the windshield frame is 6000 aluminum I tested it.

Printed a cover for the antenna mount

I still have one that I would sale. If somebody wants it let me know.

I have a very good version of the wiring schematic where you can read every number, but unfortunately it is around 20mb so to big to upload. Here is an example how mines look like when you zoom in. Let me know if you want to have these.

It makes no difference if I rotate this aluminum blocks I already tried this. I made now my own adapter I will see how that fits.

The other side looks exactly the same. And it makes also no difference if I rotate the bracket 1/2 turn.

This is how it looks like when I screw it on the little braket. That could not be right.